Category: laser cutting
2026-09-04
Thin- and Thick-Sheet Laser Cutting: Differences and Parameter Adjustments
How to Choose Between Fiber-Laser and CO2-Laser Cutting These topics are closely related. Sheet thickness affects not only cutting parameters but often also determines which laser equipment should be used. This article combines both topics to support a complete understanding and systematic decision-making. Part 1: Differences Between Thin- and Thick-Sheet Laser Cutting There is no […]
Read More →2026-09-04
Detailed Comparison of Laser Cutting Parameters for Carbon Steel, Stainless Steel, Aluminum, and Copper
Laser cutting may appear to be a process in which “one machine cuts everything,” but the physical and chemical properties of different materials vary greatly, so cutting parameters must be adjusted for each material. One of the most common mistakes is applying carbon-steel cutting parameters directly to stainless steel or aluminum. The result may be […]
Read More →2026-09-04
Common Laser Cutting Problems: Causes and Solutions for Burrs, Dross, and Black Cut Edges
In laser cutting production, burrs, dross, and black cut edges are three of the most common quality defects. They may all look like an “unclean cut,” but their causes are different and require different corrective actions. When operators encounter these problems, they often increase power or gas pressure by habit. This may address the symptom […]
Read More →